Bosch Motorsport 731cc EV14 Medium DENSO Fuel Injector
731 cc/min (66 lb/hr) @ 3 bar (43.5 psi)
Part Number: AF49-1906
Specifications
731cc/min @ 3 bar ( 43.5psi )
Bosch 0 280 158 235
Single 30 degree spray pattern
Medium Body length 48.65mm
Overall Length 65.50mm
Injector diameter 14mm
High Impedance ( 12 ohms )
E85 / Alcohol compatible
Sumitomo / Denso connector - AF49-1522
Direct fit Audi 06h 906 031
VW 06h 906 031
Aeroflow Performance now stock the most popular range of performance fuel injectors from Bosch Motorsport. Don't be fooled these are genuine Bosch products beware of fake products listed as genuine, we buy direct from Bosch Motorsport Australia. With these fuel injectors Aeroflow Performance can now offer each customer a one stop shop for your entire fuel delivery system. We offer fuel injectors with a variety of flow rates, physical sizes, and fuel compatibility ranging from pump 98 to E85, Methanol and popular race fuels. We recommend after methanol-operating, the fuel injectors must be flushed with standard gasoline-fuel to prolong the life of the injector and stops them from blocking up. Each injector O-ring is compatible with ethanol/alcohol fuels and pump 98 fuel. These injectors can be driven with the saturated drivers found in every OEM ECU and most aftermarket ECU's for ease of useability across the board. The injectors are able to function at high fuel pressures and don't exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. This makes these injectors very well suited to turbocharged and supercharged aftermarket or OEM applications that see high fuel system pressures and in fact, that is exactly what they were designed for! Aeroflow also stock a full range of injector connector plug adapters enabling a quick and simple upgrade to almost any vehicle.
